Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$59.99
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
$129.99
These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike
$13.99
- 4 removable plastic hooks - To tighten, pull inner cord over additional hook - 25cm x 25cm (10" x 10") unstretched - Durable 3.5mm diameter bungee cord
$9.99
Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.
$23.99
Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.
$38.49
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$350.00
The adjustable cargo rail is the behind the scenes workhorse that makes the Haul LT electric bike magic. Set them up for whatever you need to get more into it. Strap on your cargo bags, panniers or use them as passenger handlebars; with the adjustable cargo rail, the Haul LT is your oyster. - Customizable support for Cargo bags, panniers with vertical mounting points for locks, bottle cages, and other Globe electric bike accessories. - Designed for frictionless compatibility with Haul LT. - Intended for use with the Cargo Side Bags or passengers, not a loaded platform. - Able to be used as handlebars for passengers. - 3 width options and 4 height settings. - QR pins for easy adjustment or removal. - Requires tools for assembly not included with purchase.
$130.00
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).
$70.00
All Globe racks are made with T-channel aluminum rails to maximize versatility, capability, and creativity. Many of our Globe-branded accessories mount directly to these channels, but they will also accept just about anything you can imagine bolting to them. To help unlock that possibility, the Rack Customization Kit provides an assortment of bolts and T-nuts compatible with our front and rear rack rails. Just BYO milk carton, wine crate, cooler, you name it! Two T-channel rail pieces can be used to increase the effective dimensions of your rack to provide a more secure platform for large or awkward gear. - Compatible with Globe Haul ST and Haul LT rear racks, and Globe Front Rack. - Includes two rack extension rails, eight T-nuts, and 12 assorted bolts. - All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.
$260.00
The Globe Haul LT electric bike running boards will help keep your passengers and your cargo rock steady as you zip through your day. This is support where you need to help create a stable ride and get more into it. - 2 full-length running boards - Designed for frictionless compatibility with Haul LT - 66 lbs max capacity per side - Includes all required tools for assembly - Sustainable, bamboo platform with grip tape top
$50.00
Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts. - 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.
$153.00
Fit Kit SET723.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.. This kit includes: - 12 mm thru axle with 129 to 135 mm length and 1.0mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack’s load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame Fit Kit Finder: https://oldmanmountain.com/fit-kits-and-spare-parts/#fit-kit-finder We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$157.00
Fit Kit SET809 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 209mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$157.00
Fit Kit SET807 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 217—229mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET727 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 135 mm thru axle with M15 x 1.5 mm thread pitch, with a spacer to reduce to 130mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$8.00
Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.
$8.00
Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.
$8.00
Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.
$15.50
Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.
$15.50
Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.
$15.50
These are the zip ties included in with our Fit Kits - Special stainless steel metal tang on the zip tie provides high strength 120lb load rating. - UV resistant material for outdoor adventures. - Panduit # BT2LH-TL0
$24.99
The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)
$37.99
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz
$11.99
Round Monostay Adapter - Hardware included
$16.99
- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"
$19.99
A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size
$7.99
Genuine replacement parts for your Interchange bag system. - The perfect accessory for when you have multiple bikes or just need a replacement. - Interchange bracket for Quick Cleat - Rugged and lightweight plastic construction - Easy on, easy off storage
Page 1 of 1