Tools

- The wrench is used to remove and install Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King bottom brackets - Small wrench is included for removal and installation of Shimano plastic bolts that are used on the Hollowtech II cranksets - Material: premium flex plus carbon steel, Surface finish: chrome plated according to ISO1456:2009

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.

Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

- Accuracy: 0.02mm/0.001" - Measuring speed:1.5m/sec - Made according to standard DIN 862 - Dual scale in inch and mm

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

- Hex wrenches 4, 5, 6 - TX wrench 25 - PH1 screwdriver - Flat screwdriver 1.0 x 5.0

- Metal tire levers are used on wheels where mounting and dismounting the tires with plastic tire levers is difficult or impossible. - Can be stuck behind the spoke, with help of the hook on the end of the lever

- This chain tool can cover anything from 5 to 11 speed - Its handle doubles in function as a valve core remover for Schrader and Presta valves

- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible - 270mm of length for extra leverage - Small and light weight, perfect for toolbox and traveling

- The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.

Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.

Material: premium chrome vanadium steel

- Blade chrome plated, black anodised tip - Handle – polypropylene

- Ratchet operates in clockwise and anti-clockwise directions - For tightening on right hand threaded bolts and nuts - Signal when set torque is reached - Default value for the recalibration interval is 12 months of use, or approximately 5000 cycles - Dual scaled, Nm and Kgm

Three most popular TORX sizes: T10, T15 and T25mm