Bike Equipment

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 752 g / 1.66 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

Replacement LED assembly for the Centro LED helmet.

X-Long Mudflap/Spoiler can be retrofitted to any fender profile of the correct size. A hole may need to be drilled in the profile if one isn't already there. - Adds 6 inches of coverage to any fender profile - 35mm size fits fender profiles up to 35mm - 53mm size fits fender profiles 46mm-55mm

The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Durable boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 309g per pair - 9/16" / 1/2 axle options - Dimensions: 100 x 86mm

- 2 Super bright LED's per light - Soft yet durable Silicon casing - Weather-tough water resistant design - Universal rubber bracket

Head and Tail Light features: - off-constant-flash-chasing - 2 x CR2032 (3V Lithium) bat. incl. - 40/80 hours of burn time (constant/flash) - 600m visibility

- Light, discrete and durable polypropylene mudguard for Fat and Plus size bikes - Universal mount, fits rigid and suspension forks - 286 x 300mm - 48g

- Adapts to 24'' or 26'' wheels - Made of shock resistant polymer

The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

- 2 Super bright LED's per light - Easy On/Off - Just push the lens - Weather-tough water resistant design - Universal rubber bracket

- One-piece resin body and cage - Toe-clip compatible

- High impact Resin multi-use body with integrated cage - Externally sealed ball bearing system - 100mm x 82mm platform - Weight: 316g pair (9/16")

Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.

Bicycle frame top-tube mounted storage pack mounts behind the stem. Nylon construction with mesh flap cover. Padded sides help maintain shape no matter the contents. Available in two size options. TECH SPECS - Size: Small: 75mm x 40mm x 105mm (220cm3) or Large: 150mm x 50mm x 90mm (386cm3) - Color: Red, Grey - Weight: Small: 15g, Large: 30g

The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Deep side skirts protect stanchions and dust seals from rocks and debris

Axiom's Frontrunner Front Fender easily installs on your down tube with rubber straps. Axiom reduced the impact of their manufacturing and shipping methods by designing the Frontrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist front fender compatible with 26”, 650B and 29” wheel sizes. - Virtually unbreakable polypropylene body - Adjustable rubber straps mount to down tube - 100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket; hardware included

Say goodbye to flying mud! The SPEEDROCKER Extension clip-on mudguard extension mainly protects riders behind you from dirt and wet conditions. The extension—made of black, impact-resistant plastic—can be easily clipped onto the tried and tested SPEEDROCKER rear mudguard, thus extending it by 170mm. It can be mounted and removed without any tools in just a few seconds. The splashing between the tire and mudguard at the lower end also allows it to better deflect any spraying water and mud. This not only protects the rider's back, but also their cycling companion from any flying dirt. - Weight: 36g - Length rear fender: 170mm

Lightweight and strong one-piece aluminum flat pedal in a premium barrel polished aluminum finish. - Tough 7mm boron steel axle - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" axle - Dimensions: 101 x 79mm - Silver - 368g per pair

Blackburn's minimalist Click front light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 20 lumen front light - Versatile silicone mounting system - Waterproof to IP-65 standard

Blackburn's minimalist Click rear light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 4 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 4 lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

Topeak's TriBag keeps your gear handy so essentials are always within reach. This top tube pack sports a flap that folds over the opening to keep things in place while still allowing on-the-go-access. It attaches via hook-and-loop straps and you'll have plenty of room for carrying your phone, wallet, tools and energy bars. Size - 14 x 10.2 x 4 cm / 5.5” x 4” x 1.6” (Medium) - 18 x 10.2 x 4 cm / 7.1” x 4” x 1.6” (Large) Weight - 59 g / 2.08 oz (Medium) - 72 g / 2.54 oz (Large)

Head and Tail Light features: - off-constant-flash-chasing - 2 x CR2032 (3V Lithium) bat. incl. - 40/80 hours of burn time (constant/flash) - 600m visibility

- Internal elastic pocket - Tail light attachment - Reflective piping - Small: 16 x 7.5 x 9cm - Medium: 19 x 8 x 9cm - Large: 21 x 9 x 9.5cm

- Design for road bikes - Installation and angle adjustment without tools - Made of ultra-resistant black polymer resin - Mounts onto the seat post - Blade width: 45 mm

Charge, Click, Go Click Power Free yourself from the hassle of batteries! This small but essential accessory makes you visible to traffic. Bright side beams throw off additional light, and the silicone mount fits almost any handlebar. A Micro-USB cable makes it easy—just charge, click and go! - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time

Charge, Click, Go! Hassle-Free Safety Light Just press the lens and, click, traffic can see you! A silicone mount lets you attach this powerful little light almost anywhere, and the handy LED fuel gauge tells you when it’s time to recharge with its micro-USB cable. No more batteries — just charge, click and go! - Charging Cable Included, No Tools Required - Lithium Polymer Battery - Waterproof To Ip-65 Standard - 3-Hour Recharge Time