Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Chainrings

$74.99
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications.

$59.99
Shimano XT M770 10-Speed Chainring
- XT FC-M770 and FC-M780 10-Speed cranks use the same middle chainring
- Chainring BCD: 104
- Color: Black/Silver
- Drivetrain Speeds: 10
- Material: Steel/Carbon
- Ring Position/Type: Middle
- Tooth Count: 32

$14.00 - $31.99
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

$34.99 - $49.99
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

$114.99
12 Good Reasons
If you're looking for a bomber new chainring that can run with your Shimano 12 speed drivetrain, then look no further. This direct mount ring has the versatility of RF CINCH integration and the stiffness to turn all your "push" into straight-up "go".
Built to Last
Created from 4mm-thick 7075-T6 alloy plate for big-time stiffness and strength. Its NW tooth profile is Shimano 12-speed specific and provides secure chain retention
All-Round Performer
The Race Face CINCH interface makes this direct mount chainring fast and easy to swap for different sizes to customize your Shimano 12-speed drivetrain.
- Compatible with Cinch Direct Mount Cranks
- 7075 Aluminum
- Direct Mount

$86.99 - $99.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders.
- Compatible with 9, 10, 11, and 12 speed
- Narrow Wide tooth profiling ensures consistent chain retention
- Lockring installed/removed with ISIS BB tool
- Stiff 4mm plate thickness to transfer loads without flexing

$134.99
- BCD: 110
- Chainring Bolts: 5
- Chainring Comp: Double
- Teeth: 50
- Primary Color: Black
- Material: Aluminum
- Position: Outer
- Speed: 11

$104.99 - $114.99
The new FLT 12 SPD chainring has an updated tooth profile optimized for SRAM Flattop 12 SPD chains. Easton direct mount rings use a new narrow/wide design specifically tailored to road/cx/gravel applications. The individual tooth profile has moved from the traditional symmetrical shape to more directional specific design with the intention to create a positive chain roller engagement to help with chain retention, critical to prevent chain slip and bounce over rough terrain.
Compatible, but not optimized for, 11-speed chains. Ring only. Crankarms and spindles sold separately.
- EA90 SL Alloy
- Optimized for 12-Speed Flattop Chains
- Cinch System Compatible
- Variable Tooth Width
- Optimized Retention via Directional Tooth Design
- Weight Complete: 442g 172.5mm 40t w/o BB
- Chainline: 47mm

$64.99 - $83.99
- Wide tooth profiling prevents chain drop without a chainguide
- Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains
- Constructed in Canada from 7075 aluminum

$144.99
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain.
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with Shimano Asymmetric 110 BCD Cranks or Campagnolo CX10/11 cranks
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$124.99
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30.
Compatibility:
- These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring.
There are 3 offsets: 0mm, 3mm, and 6mm
- 49mm chainline, 0mm offset for BB30 short-spindle cranks
- 52mm chainline, 3mm offset BB30
- 47mm chainline, 6mm offset for cyclocross and road cranks
- 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost
Notes for use with Fat Bikes:
- If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring.
- If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

$109.99
The Wolf Tooth 64 BCD Universal Chainring is the perfect solution when you need something smaller than a 30t on your 104/64 BCD cranks or your 11-speed Shimano XT and SLX 96/64 BCD cranks.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- For use with 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Chainline is 46mm on a triple and 48mm on a double crank
- Chainline on a standard M8000 or M7000 crankset is 48mm and 50mm on a boost version

$139.99
Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075 Aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$129.99
This chainring's tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- Compatible only with Hyperglide+ chains
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with optimal chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles
- Chainrings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets
- Use only the stock Shimano XTR chainring bolts (M7)
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$129.99
The Wolf Tooth 96 BCD chainring is designed to fit 4-arm Shimano XT M8000 and SLX M7000 cranksets.The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- These rings fit on Shimano XT M8000 and SLX M7000 1x or 2x cranksets
- Compatible only with Hyperglide+ chains
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with optimal chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles

$139.99
- Engineered to be quiet and smooth
- Patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability
- Prevents premature ring and chain wear that can come from non-optimized profiles.
- 6mm offset
- Chainline 45mm
- Weight: 38t - 81 g | 40T - 87g | 42t - 97g | 44t - 117g
- Material: 7075-T6 aluminum
- Made in the USA
Compatibility:
- Use Drop-Stop B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, SRAM Flattop, Campagnolo, KMC
- For all SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard

$124.99
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility
These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings.
Specifications:
- Boost: 3mm offset for 52mm chainline
- Mount type: Direct Mount for SRAM
- Offset: Boost
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$142.99
Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$139.99 - $142.99
Direct mount rings designed for SRAM cranks with removable spiders. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with the SRAM RED and Force AXS 8-bolt interface
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$129.99
These Wolf Tooth Direct Mount Chainrings are designed to work with Cane Creek eeWings cranksets and SRAM direct mount cranksets with a 3-bolt interface. The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- Nickel plated chainrings are designed to be compatible with Cane Creek eeWings cranksets
- Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing
- Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles

$139.99
Designed to fit 4-arm 96 Asymmetric BCD XT M8000 Cranks. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075 Aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$124.99
Designed to fit 96 Asymmetric BCD XTR9000/9020 Cranksets. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Only compatible with Shimano XTR 9000 or 9020 cranksets
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075 Aluminum for long life
- Installation requires the M7 bolts that are sold with the XTR cranks
- Use of a clutch-style rear derailleur is recommended

$109.99
Designed to fit 4-arm 110 Asymmetric BCD Shimano Road Cranksets. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power
Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
Made from 7075-T6 aluminum for long life
Use of a clutch-style rear derailleur is recommended
May require modification if used with Shimano Dura Ace 9100 or Ultegra 8000 cranksets

$104.99
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain.
- Compatible only with Hyperglide+ chains
- For use with Shimano XTR M9100 series cranksets
- Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles

$142.99
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings.
- Elliptical rings provide smoother, more efficient pedal rotation, which means better traction
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with the SRAM RED and Force AXS 8-bolt interface
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- Compatible with 12-speed SRAM Flattop chain

$144.99
Direct mount rings designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting
- Made from 7075-T6 aluminum for long life
- 6mm offset
- 45mm chainline
- Use of a clutch-style rear derailleur is recommended
- Use the same 8 bolts that were on the crankset to attach the Wolf Tooth ring

$139.99
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models)
- Features Drop-Stop tooth design to prevent unwanted chain drop
- Mount using the stock Shimano XTR M7 chainring bolts
- 49mm chainline for 28-34 tooth and 50mm for 36 tooth
- Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain)
- Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
Page 1 of 5
Next page